Introduction to the installation method and steps of the whole wardrobe folding door
[ Chinese wardrobe net ] The opening space of the whole wardrobe folding door is large and clear at a glance, but the installation is more troublesome than the wardrobe sliding door. So how to install the whole wardrobe folding door? What are the skills in the process of installation? The following China Wardrobe net gives you a few tricks.
Overall wardrobe folding door installation method
1. Confirm that the length of the track is correct. If it is too long, use a saw to saw off the long part. Be careful not to let sawdust enter the track.
2. Insert the folding door into the track in a bundled state.
3. Confirm the direction of the handle and the installation direction of the simple lock, then install the rail. Screw the screws from the center to the left and right. After the installation, untie the rope that binds the folding door.
4. Install the iron plate, and check the position of the magnet on the folding door in advance, then tighten the iron plate with screws.
Installation steps for the overall wardrobe folding door
Overall wardrobe folding door installation - position
First of all, we need to determine the installation position before installing the folding door. If it is used as the kitchen door or the toilet door, it should be installed in the position between the door frames. If it is used as the partition of the living room, make sure the position is set, leave the corresponding space, and measure the straight line. Length, then confirm the length of the track is correct, if the track is relatively long, use the ruler to use the length, make a mark, use a hacksaw to saw off the long part, be careful not to let iron filings fall into the track, so as not to affect The sliding of the door.
Overall wardrobe folding door installation - insert folding door
Pick up the slide, insert the folding door into the slide in the bundled state, push it to the middle of the slide, and the bundled state is more convenient to install. It is pushed to the middle to prevent accidental sliding during installation. Falling on the road.
Overall wardrobe folding door installation - fixed
Before fixing, confirm the direction of the handle, and use it to pull to the left or right. Select the corresponding direction according to your habits. After confirming, start to install the track. Install it in the order of the middle and the back, and screw the screw into the track with the impact drill. And the door frame or the wall, because the door frame or the wall is relatively thick, it is difficult to screw in the screw with a simple screwdriver, so with the help of the power of the impact drill, after installing the screw, untie the rope that binds the folding door.
The whole wardrobe folding door installation - into the rubber sleeve
Pull the folding door apart, and determine the position of the iron plate on the wall or door frame by comparing the position of the magnet on the door. After determining the position of each iron plate, drill the hole with a hammer drill, about four centimeters in depth, then Insert the rubber sleeve into the hole and drive the rubber sleeve in turn.
Overall wardrobe folding door installation - fixed iron plate
Push the folding door to the middle again, pick up the iron plate, align the hole on the center of the rubber hole, screw the screw into the rubber sleeve with a screwdriver until the iron plate is fixed, and use the same procedure to suck each The iron plates are fixed, then the folding door is opened, and the side without the handle is sucked with the iron plate, so that the folding door is installed.
The product is made of food-grade PP material, which is anti-bacterial, insect-proof and not easy to damp. It can be licked and has no peculiar smell. A bowl is double-purpose, can hold water or grain, save time and effort, convenient and practical. The inside of the bowl is professionally polished, the arc does not leave a dead corner, and it is clean after a punch.
Capsule Wiggle Dog Bowl,Slow Feeder Puppy Bowl,Anti Spill Dog Bowl,Dog Bowls For Small Dog
DongGuan Lucky Pet Products Co., Ltd. , https://www.dgluckypet.com