How to install the cloth wardrobe - the installation steps and maintenance methods of the cloth wardrobe
[ Chinese wardrobe net ] Wardrobe is one of our indispensable furniture. Without the storage space of the wardrobe, the clothes will become messy, especially for the family, it needs more than one wardrobe, and the cloth wardrobe is a small apartment. The best choice. Cloth wardrobes are generally small in size, are also relatively easy to move, and are inexpensive, making them the first choice for many student residences. Then, after buying a cloth closet, facing a bunch of parts, how do we install them into a cloth closet?
Cloth wardrobe installation
How to install the cloth wardrobe - how to install the cloth wardrobe
For the installation of the cloth wardrobe, basically the chassis is installed first, then the rest of the shelves are installed, the whole skeleton is installed, and then the cloth is laid from top to bottom, pay attention to the position of each small hole, and then install the cloth. Install some pipes inside the wardrobe, and finally wipe the cloth to complete the installation of the cloth wardrobe. First find the pipes with the same type of labels on the cloth wardrobe, put them together, if there are no labels, they are divided according to the length and length. The installation of the shelves is generally used with long and short tubes.
1. Locate the bottom part, first install the 4 tubes in the flat part of the plastic part, then insert the 4 long tubes into the 4 holes of the plastic part and lay them flat on the ground.
2. Open the zipper of the cloth cover. There are 4 small holes at the bottom of the cloth cover. Put the 4 holes into the four pipes erected on the bottom frame and pull the cloth cover from the bottom to the top.
3. At this time, the cloth cover is placed on the outside, and then the interior of the cloth wardrobe is assembled. First install the remaining tubes one by one, install the top frame, and then pull the cloth cover up and cover the top frame. Note that the assembly of the top plastic part and the long and short tube is the same as that of the bottom frame. Be sure to pay attention to the position of the long and short tubes, otherwise it will be reworked at the end.
4. Adjust the cloth cover and straighten the cloth until the cloth is flat and there are no wrinkles. At this time, the installation of the cloth wardrobe is completed.
How to install the cloth wardrobe - the maintenance method of the cloth wardrobe
1, the cloth door should be kept clean, the steel pipe must not have debris, dust. Usually, you can wipe the cabinet and cabinet door with a semi-wet clean rag. The dirt can be cleaned with a small amount of soapy water or a neutral detergent. Be careful not to use corrosive detergent.
2. The dust in the cloth closet can be cleaned by a vacuum cleaner or a small brush. The metal parts such as the cabinet frame and the tie rod should be wiped with a dry cloth. The desiccant can be used regularly to keep the cloth closet ventilated and dry, and to prevent the clothes from getting wet. Try to avoid using a chemical-containing fragrance for deodorization, otherwise it may damage your clothes.
3. When the weather is too humid, the doors and windows should be opened regularly for ventilation, and a small bag of dry lime or desiccant should be placed in the corner of the closet to prevent mildew.
4. Remember not to place the cloth closet in direct sunlight, otherwise the non-woven cover will be easily deformed and brittle under illumination.
5, the cloth wardrobe will be slightly deformed after a long time of use, usually every two to three months should check the placement position of the corrective cloth wardrobe to extend the service life.
After reading the above introduction to the installation method of the cloth wardrobe, do you think that the cloth wardrobe is not difficult to install? In fact, the installation of the cloth wardrobe is quite simple, but we must pay attention not to damage the parts, especially the brackets, during the installation process. Once damaged, it can't be installed. The material of the cloth wardrobe is cloth, which is not solid enough compared to the wooden wardrobe, because it must be well maintained.
Aluminium Garden Sofa Furniture
Outdoor aluminum Sofa furniture are Rust-resistant powder-coated frames with comfortable waterproof cushion. Modern, clean line design with fresh white color and blue sky cushion, you can rest yourself completely.
Hidden rust-resistant, powder-coated aluminum frames provide sturdy support. Thick, high-density foam cushions are included.
100% waterproof polyester fabrics
All-weather cushions have a high-resiliency foam core wrapped in plush polyester
fabrics encase the thick, double-wrapped foam cushions.
Aluminum sofa furniture are easy to clean: To clean spills or stains, dilute one cup of chlorine bleach in one gallon of water and test in an inconspicuous area. Saturate a rag or brush in the bleach solution, scrub the entire cushion, rinse well with water, and let the cushions air dry.
If you have any questions, please contact with us directly. Outdoor Aluminum Furniture are produced by Golden Eagle Outdoor Furniture Co.,ltd with High Quality and Good Appearance. Welcome you to visit our Factory for any inquiry, please send mail directly to us.
Wicker Aluminium Garden Sofa Furniture,Patio Aluminium Garden Sofa Furniture,Rattan Aluminium Garden Sofa Furniture,Outdoor Aluminium Garden Sofa Furniture
Golden Eagle Outdoor Furniture Co., LTD. , https://www.gegardenfurniture.com