How to deal with special obstacles such as beams and columns in the overall wardrobe
[ Zhonghua Wardrobe ] Most of the current buildings are frame structures. Therefore, if you want to make a wardrobe in the bedroom, you will inevitably encounter special obstacles such as beams and pillars. How to plan for the rain?
1. According to the shape of the beam and the pillar, the pillar plate and the cladding beam plate can be designed to hide the beam and the pillar, and not to be exposed, so that the wardrobe forms a joint body and achieves reasonable use of the space.
2. The 18mm thick plate should be used for the column and the cladding beam to ensure that the assembled wardrobe is firm.
3. With the position of the pillar, design its façade space as a laminate for stacking small items or a special place for resting shoes, hats, ties, etc.
4. If there are objective beams and columns, the overall wardrobe design should also consider the left and right wide side panels of the light should be open L-shaped integral panels.
5. The sliding door is designed to the top of the ceiling. The side of the front side of the beam should be sewn from the bottom of the beam to the floor through the same size plate as the beam to ensure that the sliding door can be completely closed when closed.
6. If the overall wardrobe is designed such that the top cabinet is a wooden board that is flattened and the lower cabinet is a sliding door, the side of the front side of the beam should pass through the same size as the beam, from the bottom of the beam to the top of the lower cabinet. The seat is sewn.
7. If the whole wardrobe top cabinet and the lower cabinet are to be designed as traditional flat-opening doors, then the columns and beams should be avoided, and the design width of each door should be the same to ensure the consistency and aesthetic coordination of the overall door. .
8. If the cabinet may touch switch sockets, cable TV, broadband outlets, etc., the overall wardrobe service provider should be evaluated and measured at the progress of the water and electricity wiring to ensure that they can be used reasonably in the future.
Hair extension keratin glue granules can be applied with fusion iron connector, hair extension iron, pre-bonding hair, good for hair extension or nail extension, the abundant quantity is enough for you to use and replace.
Strong keratin granule beads have nice viscosity, they have strong adhesion effect, there is no carbonation in continuous use, aging resistance, less wire drawing, no odor, safe for you to use
these granule beads are made from quality EVA, which are safe for use on the hair, they can melt and flow at high temperatures of 270 to 340 degrees Fahrenheit, you can use our product to create various hair styles
Hot melt glue stick suitable for Human Hair Works well in all temperatures.Can be used with Hair Extension Glue Gun & pre-bonding Hair Extension.
hot glue sticks fits most of glue guns on the market. It's also incredibly durable, flexible and long lasting. Good flexibility and luster, durability for daily gluing .
Hot fusion extensions tools are good for bonding heat-sensitive materials, not only can be applied for grafted wig, but also for nail extension, manual, accessories, shoes, wood products, ceramics, toys, cardboard boxes and more
Solid Glue,Italian Keratin Glue Grains,Keratin Glue Granule Bead,Hot Melt Glue Stick For Hair Extension
Xuchang Le Yi De Import And Export Trade Co., Ltd. , https://www.alileaderbeautys.com