Which kind of custom-made wardrobe plate is good?
[ Chinese wardrobe net ] Blockboard (large core board): good moisture-proof effect, can not directly paint, the middle of the blockboard is made of natural wood strips, the two sides are glued with very thin veneer, as the name suggests The core board is one of the most important materials in the decoration. It can be used for furniture and wooden doors and door covers, heating covers, curtain boxes, etc. Its waterproof and moisture-proof performance is superior to particleboard and MDF. The woodwork such as furniture made of large core board has to pass through two steps of using adhesive board and painting, and the cost is higher. The large core board is divided into 3, 5, and 9 PCT plates according to the thickness. You can choose according to the pressure and strength to be accepted. The thicker the price, the higher the price.
Glulam: not easy to deform, this is an emerging solid wood material, using high-quality imported large-diameter logs, deep processing and imaging fingers like staggered stitching. Due to different processes, the environmental performance of this board is superior. It is 1/8 of the amount of formaldehyde allowed in the large core board. The price is about 200 yuan per sheet, which is slightly more expensive than the high-grade large core board.
The density board has a poor nail holding power than the particle board. The particle board is a natural material that is crushed into granules and pressed into a board. It is the main material of the cabinet. The MDF is formed by pressing powdered wood chips, and the flatness is good, but the moisture resistance is poor. In contrast, the nail holding force of the MDF is worse than that of the particle board. If the screw is loose after the screw is tightened, it is difficult to fix because the strength of the MDF is not high, so it is rarely used for the cabinet.
Moisture-proof board: The custom-made wardrobe uses the processing technology of particle board, but the adhesive is changed into a green waterproof and environmentally friendly adhesive, which overcomes the shortcomings of the particle board and has good waterproofness. It is a common material for cabinet cabinets.
Melamine board: The full name is melamine impregnated film paper veneer wood-based panel. The paper with different colors or textures is immersed in a melamine resin adhesive, and then dried to a certain degree of solidification, which is laid on the surface of particleboard, medium density fiberboard or hard fiberboard, and is hot pressed.
Fireproof board: Fireproof board is a decorative board made of silicon material or calcium material as the main raw material, mixed with a certain proportion of fiber materials, lightweight aggregates, binders and chemical additives. It is a new type of material that is currently being used more and more. The construction of fireproof board has higher requirements for sticking glue, and the price of fireproof board with better quality is more expensive than decorative panel. The thickness of the fireproof board is generally 0.8 mm, 1 mm and 1.2 mm.
Ningbo DSS Intelligent Technology Co., Ltd , https://www.dssking.com