How to judge the pros and cons of the wardrobe sheet?

[ Chinese wardrobe net ] Although the overall wardrobe has only recently emerged in China, its development speed is quite fast, and it has already become the favorite clothes storage product for the modern 80s and 90s, but it can be used to make the whole wardrobe . Quite a lot, in the face of all kinds of products, how can consumers as a layman identify the advantages and disadvantages of the wardrobe sheet? The well-known whole wardrobe enterprise - the Federal Shangpin Road Wardrobe Enterprise Xiaobian is here to make the following tricks for you, hoping to help more potential consumers in the overall wardrobe to understand the relevant knowledge in this regard.

The board is a must for the whole wardrobe. When purchasing the whole wardrobe, the quality of the board directly affects the final quality effect of the whole wardrobe. For those friends who are not very familiar with the board, how to judge the quality of the board?

First, see if the sheet substrate is environmentally friendly. As long as the content of free formaldehyde in the board is ≤9mg/100g, that is, the European E1 environmental protection standard, it is not harmful to human health. The most direct way is to open the door and pull it open. If there is a strong irritating smell, even tears, indicating that the formaldehyde content exceeds the standard; the second is to look at the merchant's material testing certificate to see if it holds the relevant national wood-based panel quality. Inspection certificate of the testing center.

Second, look at the sheet of the wardrobe is to use high-density board or particle board, judging from the cut surface of the board, the fine fibers inside the high-density board are tightly combined, dense, heavy. The high-density board can withstand large pressure and has a long service life; while the fine particle structure of the particle board is not tight enough, even small pores can be seen, it is lighter in the hand, the gravity is small, and the service life is short.

Third, the table should be like one: look at the material in the side plate hole; many merchants often use some inferior materials when using the material, and the whole wardrobe constantly exposes more drawbacks during the use process.

Fourth, whether the key hardware accessories are branded with their own brand anti-counterfeiting logo, and the weight of the hardware. Although the hardware possesses a small amount in the overall wardrobe, it has a great influence on the performance of the overall wardrobe.

5. Aluminum alloy sliding door frame material: look at the cross section bright and smooth without burr, the minimum wall thickness requirement is 1.1mm;

Sixth, standard specification plate: there are standards, process and precision are guaranteed.

Seventh, push and pull to listen to the sound to judge the quality of the pulley, but not to say that the smaller the sound, the better, to use the performance is good.

Eight, edge sealing: whether it is smooth, delicate, strong adhesion; the fineness of the overall wardrobe edge sealing process directly affects its performance and service life.

Nine, see if the plate is real material. In order to reduce costs, some small manufacturers currently on the market usually sell dog meat and deceive consumers. The thickness of the standard cabinet body is 18, and the small manufacturers generally use the particle board as a high-density board to promote the board thickness of 16, while the consumer said that the board is 18. The thickness of the backing plate is generally 9, and the thickness of the door panel is 9.

Vacuum Flask

Vacuum Flask,Stainless Steel Vacuum Flask,Stainless Steel Rainbow Vacuum Flask,Stainless Steel Silk Printing Vacuum Flask

Ningbo Auland International Co.,Ltd. , https://www.everwinbottle.com