How to prevent wardrobe deformation
[ Chinese wardrobe network ] How to prevent the deformation of the wardrobe , in our lives, many consumers can not be separated from the wardrobe, cabinets are an important part of the bedroom furniture, but also constitute one of the large pieces of bedroom furniture, therefore, the cabinet The quality of the class directly affects the sales of the whole product, and there are statistics. The most dissatisfied with the consumer is the warpage of the door.
Avoid using irritating and corrosive chemicals such as alcohol and detergents that are easily damaged by wood.
Wooden wardrobes can be wiped with a clean rag, but if it is dirty, use soap or a neutral detergent and wipe it with a damp cloth.
Ultraviolet light is also destructive to wood furniture, so proper use of fabrics or curtains to avoid sun exposure is necessary.
If you want to wax, it is best to choose a wax with a high concentration and solid, free of silicon, so as not to damage the paint surface.
Improper paint treatment causes deformation of panel furniture parts
Component stacking causes deformation in production, some operators are convenient for drawing, stacking the plates freely, or stacking the plates is not flat, and even leaning the plate against the wall, causing the plates to enter Before the next process, it was deformed due to its own weight. The coating process causes deformation During the finishing process, due to improper use of the process and raw materials, the plate is deformed and deformed as the internal stress of the coating changes. The effect of finishing putty In the decoration of the door parts, many manufacturers use pig blood putty or glue to prepare the putty in order to reduce the cost. Because these two kinds of putty contain a lot of water, the substrate commonly used for plate furniture - medium density Fibreboard and particleboard are particularly hygroscopic, so when one side of the door panel is not putty, and the other side is coated with such a water-rich putty, the door panel part is hygroscopic and deformed.
The influence of the drying process is in the production. When the board is coated with putty or paint, it should be placed on the drying rack for natural drying. If the rod of the drying rack is too sparse or uneven, it will also cause the door. The part was found to be bent and deformed during the drying of the paint. The influence of the internal stress of the coating will form a certain coating after curing. Even if there is no external force, an internal stress will be generated. If the internal stress is not handled properly, it will become the main cause of bending deformation of the door component. one.
As a result of the use of shockproof protection materials, coupled with special ergonomic design and unique reinforcement production technology, very solid and durable, popular. Laptop Document Bag in addition to a special shockproof computer protection layer, there is considerable space can be used for small items such as travel luggage. Many high quality shoulders backpack is also widely used as a sports travel bag. If you need go to business and study, the canvas backpack will be your best choosing. And also you could choose our other Sports Backpack.
travel laptop backpack, Shoulders Backpack,One Shoulder Backpacks,Shoulder Sling Bags,business backpack, laptop trolley bag, laptop carry bag, stylish laptop backpacks
Zhejiang Yinglin Luggage Co. Ltd , https://www.yllcluggages.com