How to choose wardrobe - bedroom wardrobe selection method introduction

[ Chinese wardrobe network ] The important position of the bedroom in the home life is self-evident. The wardrobe is one of the main furniture products in the bedroom. It directly affects the personal feelings of the occupants. With the improvement of the requirements of the modern family for the wardrobe, when people choose the wardrobe products, they will also examine the wardrobe in many aspects. Below, Xiaobian will introduce you to the purchase method of the bedroom closet in detail, and friends who are interested can come and see it!

How to choose a wardrobe

How to choose a wardrobe - look at the selection of the wardrobe

The professional manufacturers choose environmentally-friendly plates that meet the national testing standards, and some manufacturers choose some inferior plates that have no test reports and pose a potential threat to human health. For example, the recent excessive formaldehyde content of the boiling water indicates the selection of materials. importance. Therefore, to buy a wardrobe, it depends on whether the business has a plate inspection report and relevant testing certificate from the national authority inspection department. Even for high-quality plates, consumers need to understand whether environmental protection is up to standard. Some wardrobes look good on the surface. In fact, with a finger stroke, you can draw obvious scratches. These wardrobes are made of surface-coated vellum paper and ornate paper sheets that are often used in low-cost wardrobes on the market, and have poor wear resistance. Professional manufacturers use environmentally friendly melamine veneers with thicker immersion paint and high temperature and high pressure treatment. The surface strength is high, abrasion resistance and scratch resistance.

How to choose a wardrobe - see the edge of the board

Professional manufacturers use precision panel saws to cut sheets, and there is no chipping around the sheets. After the edges are sealed, the water in the air is effectively prevented from intruding into the interior of the board. Some manufacturers have no professional equipment, rough cutting, and obvious edge collapse around them. Some even cut corners and cut only the front side of the board. The unsealed surface easily absorbs moisture from the air, causing the sheet to swell, causing the wardrobe to deform and affecting the service life.

How to choose a wardrobe - see hardware accessories

Professional manufacturers use famous factory accessories, quality assurance. Accessories are an important element of wardrobes, bookcases and sliding doors. They are also the most worn out devices in the use of wardrobes. The accessories are often hidden and difficult for consumers to identify. It is necessary to carefully push and pull the feeling to ensure the comfort of household products. An important indicator of durability.

How to choose a wardrobe - see the processing method

Professional manufacturers use professional automatic edge banding machine, using environmentally friendly hot melt adhesive to seal the edges, and the veneer is firm. The auxiliary materials used in the production process are environmentally friendly, in order to ensure the environmental protection of the final produced wardrobe, and to ensure that there are no harmful substances. Some manufacturers, without professional processing equipment, use ordinary universal glue to manually seal the edges, easy to pull off the drum. In addition, the harmful substances such as benzene and formaldehyde contained in this rubber are seriously exceeded, posing a potential threat to human health.

How to choose a wardrobe - see the backplane structure

Professional manufacturers use a backing plate with a thickness of 5mm or more, melamine veneer, and a trough-type reverse leather lap joint structure to prevent the back plate from directly absorbing the moisture on the wall surface. Some brands have thin back plates and are connected by nail-type back plates. The back plates are in direct contact with the wall. The moisture on the wall is easily absorbed by the plates, which is easy to get wet, moldy and deformed, and the cabinet loses its seal. Sex.

How to choose a wardrobe - see if it is customized for professional home

Brand wardrobes are professionally produced. Functional parts (drawers, trousers racks, tie trays, etc.) are standard designs. The width, depth and height are standard. At the same time, in order to meet the individual needs of customers, we also provide customized quality. And in line with the concept of professional custom home.

In addition to the above-mentioned small series for you to introduce the bedroom wardrobe selection method, friends should not ignore the choice of the brand when choosing the wardrobe products. For the judgment of a good or bad brand, you can get the strength of the brand and the advanced production equipment. Understand the degree and the service concept of the brand. Only in this way can you guarantee that you can buy a wardrobe product that suits you.

Stainless Steel Vacuum Water Bottle

Stainless Steel Bottles are made from high-grade 18/8 stainless steel. This material is food grade, non-toxic, durable and easy to clean.

Our Stainless Steel Bottles are mostly Stainless Steel Vacuum Water Bottles. They have a double-wall vacuum treatment, so they can ensure your drink keeps as it is. And you don't need to worry about getting your hands cold or hot.

Stainless Steel Single Wall Bottle has a single wall. It sacrifices thermal insulation and improves portability. Holding it in your hand all the time will not cause any discomfort.

Stainless Steel Vacuum Water Bottle,Lid Bamboo Vacuum Bottle,Stainless Steel Silk Printing Vacuum Bottle,Stainless Steel Bulb Lid Vacuum Bottle

Ningbo Auland International Co.,Ltd. , https://www.ecocolabottle.com