Oil Ting heater what brand is good oil heater maintenance

There are a lot of oil heaters on the market now, so you know what brand of oil heater is good? I believe everyone wants to know about it. Many consumers don't use it properly, so it's important to use it. It is also important for oil heater maintenance. Let's introduce it to you in the following small series.

What brand of oil heater is good?

1. Midea's Midea (started in 1968, China's well-known trademark, listed company, one of the globally competitive brands, the top 500 Chinese enterprises, Guangdong Midea Electric Group Co., Ltd.).

2, Pioneer Singfun (Zhejiang high-tech enterprises, China's well-known trademarks, Zhejiang famous trademarks, China's famous brand products, top ten electric oil brand, Pioneer Electric Group Co., Ltd.).

3. Emmett (started in Taiwan in 1973, the industry influence brand, the top ten electric oil brand, one of the market competitive brands, Emmett Electric (Shenzhen) Co., Ltd.).

4, Gree GREE (high-tech enterprises, the top 50 Asian companies, China's well-known trademarks, China's famous brand products, China's top 100 listed companies, Zhuhai Gree Electric Co., Ltd.).

5, Yuhui UFAIR (in 1997, one of the world's largest oil-tank manufacturing base, specializing in the production of electric oil heater / electric heater / ceramic heaters and other products, Ningbo Yuhui Electric Co., Ltd.).

6, Saiyi SAIYI (China famous brand, Zhejiang famous brand, specializing in the production of household appliances, the backbone of the national heater industry, China Saiyi Electric Group Co., Ltd.).

7, Aucma AUCMA (founded in 1987, China's well-known trademarks, China's famous brand products, Qingdao famous brand, Shandong famous brand products, high-tech enterprises, Qingdao Aucma Co., Ltd.).

8, Jiaxing JASUN (beginning in 1982, Zhejiang famous brand, engaged in the research, development, production and sales of various types of heaters, Ningbo famous brand, Ningbo Jiaxing Electric Co., Ltd.).

9. Winnie WINOON (one of the domestic manufacturers of household electric heaters, the top ten electric heating oil brand, the private enterprise with small household appliances as the leading industry, Ningbo Weini Industrial Co., Ltd.).

10, Samp Sampux (in 1992, Beijing famous trademark, set research and development production, sales, service as one of the enterprises, professional small household electrical appliance manufacturers, Beijing Sangpu Electric Co., Ltd.).

Oil heater maintenance

1, the correct use of the thermostat

The electric oil heater does not have a thermostat, so that the surface temperature of the heater housing can be adjusted at will (below 120 ° C). During normal operation, the thermostat should not always be set at the highest level. Otherwise, the temperature of the heater is close to 120 °C, the thermostat is not easy to operate, and the high temperature operation for a long time may cause the internal components to burn out or the protection is damaged. Therefore, when using the electric oil heater for the first time, set the thermostat in a proper position.

2, the correct choice to use the power switch

The electric oil heater uses two sets of sealed electric heating tubes as heating elements, and the two sets of heating tubes correspond to two selection switches of two grades. At present, the common heaters on the market are 1500W and 2000W. Under the condition of the line permission, the correct selection of the power gear can save power and reduce the line load. When the heater is turned on or the indoor temperature is low, the two-speed selector switch is turned on at the same time, the heater is rapidly warmed up, and after the working temperature of the surface of the casing reaches the set temperature point, the thermostat automatically cuts off the power supply. At this time, 1 or 2 should be selected. The power of the file. When the thermostat is reset, the lower power is used to heat up and gradually increase the indoor temperature.

3, pay attention to keep the room sealed

The electric oil heater uses the air convection to increase the indoor temperature, and the indoor temperature affects the power supply. The indoor sealing property is good. After the room temperature rises, the electric heating time is short, and the heat dissipation time is long, thereby saving electricity.

4, no cover

The heater works normally, and the surface temperature of the casing is relatively high, and it is generally set at about 90 °C. The temperature control of the heater is realized by the temperature deformation of the metal piece of the thermostat in the mask. If the heat sink is wrapped around the cover for baking, the temperature of the covered hot film will be significantly higher than the temperature of the in-plane bimetal, which will easily burn the clothes and may cause heat transfer oil densification inside the heater housing. The pressure rises, causing the hot oil to leak from the seal, and even the casing bursts, posing a hazard.

5, prohibiting upside down or downside heating

The special heat transfer oil is poured into the heater housing. After heating, there is a certain pressure inside. In order to ensure the internal pressure is less than 0.2Mpa during normal use, the heat transfer oil fills about 70% of the total volume, and there is a large space inside. Inverted or laid down, the internal heating tube is exposed to the oil surface. In this case, the electric heating may cause over-fire and burst, which may damage the heating tube. In this case, be careful when using it.

6, choose a qualified power outlet

The use of electric heaters must use three-hole sockets with various technical specifications that meet the standard grounding. Never switch to a two-hole socket without a ground wire, otherwise it will easily generate static electricity and there is a danger of electric hand. In addition, the socket should not be located directly above the heater to prevent heat from rising and burning the power. If there are appliances that are prone to sudden changes in current and are frequently used, such as electric welders, impact drills, etc., and electric heaters, it is easy to damage the heater. It is best to use a power strip with overcurrent protection or voltage regulator. power supply.

The above is what Xiaobian today introduces to you about the brand of oil heaters and the maintenance of oil heaters. I believe that after reading the contents of this article, what brand of oil heaters and oil heaters are maintained There is some understanding of maintenance. I hope that the content that Xiaobian will introduce for you today can help everyone.