Why do other people’s cabinets last for 10 years, and your use of one year is broken?
Why can someone else's cabinet be used for 10 years, and your skin peeling in 1 year, and it will be deformed in 2 years?
Today's article mainly talks about three issues.
1, 5 small measures to make the cabinet more durable;
2. What should be paid attention to when customizing/purchasing the cabinet;
3. How to judge whether the cabinet hardware is good or not;
One or five small measures to make the cabinet more durable
Cabinets of the same price and the same materials, why are others more durable?
Baibaobao said: In addition to the quality of the board and hardware, the environment, design, size, etc. will also affect the service life of the cabinet.
The back of the cabinet is equipped with a moisture-proof VC cloth: the back of the cabinet is attached to the wall surface, which is easily eroded by moisture. A layer of cheap VC cloth is added on the back to prevent moisture, and the cabinet is not so easy to mold.
2) Add the foot to the bottom of the cabinet, do not cling to the ground: the ground is also easy to make the cabinet wet, and the cabinet can be used to prevent the board from coming into contact with moisture and avoid mold and deformation.
3) The width of the partition should not be too large: for cabinets with high load-bearing requirements (storage cabinets, bookcases, etc.), the width of each compartment is at least less than 80cm, less than 60cm, and the wardrobe is less than 90cm, so it is not easy because the items are too heavy. The plate is sunken.
4) Multi-hole holes in the side plates: The side plates are multi-holes, and the layers of the cabinets are made active, and the height of the layers can be adjusted or the layers can be added as needed, and the space utilization rate of the cabinets is also higher. A wardrobe with holes can add layers at will.
5) The corner of the cabinet is rounded: the family has an old man or a child, and the corners of the cabinet are remembered to be rounded, so it is safe to worry about hitting the bump.
Second, how to customize / buy a good cabinet
1) Carefully check the materials used for the plates: the same kind of plates also have good quality. Some black-hearted merchants will replace the plates with poorer quality, or even replace them with “hollowâ€. Such cabinets have poor bearing capacity. It will be deformed soon.
Solution: Look for the brand when purchasing, and determine the type of plate, check and confirm when installing.
2) Be careful to reduce the thickness of the board: the door panels and partitions of the cabinet generally use 18mm or more sheets (excluding the outer layer of veneer and craft), the thickness of the bottom plate is greater than 4mm, but some unscrupulous merchants will quietly reduce the thickness by 1mm, resulting in The durability of the cabinet deteriorates.
Solution: The thickness should be written on the order, check and confirm during installation. When playing the cabinet, tell the master how many feet
3) The screw is more stable than the nail gun: between the laminate and the cabinet, it is generally fixed with lock screws and nails, but if the cabinet is heavy, the black pointed screws are more stable.
4) The cabinet should be carefully watched for four details.
Inside the cabinet: Some cabinets look very beautiful, but the interior is shoddy: the screws are wrong, the boards are broken, etc.
Below the door: the six sides of the door are to be decorated, but the bottom is easy to be stolen, not painted, painted or sealed;
➂木皮与å°è¾¹: Check whether the veneer around is stable and the edge is firm;
➃ Pull basket drawer: Install the cabinet with drawer and drawer. Pay attention to whether the basket opening and closing is smooth, whether the drawer can be pulled out smoothly, and whether it is installed.
Third, how to identify the quality of hardware accessories
The quality of the hardware determines the age of the cabinet, and it is also a place to do the cabinet work, so in this part must not be cheap, to see the brand, choose the accessories!
1) Look for good quality and good after-sales brands
Customized wardrobes generally include hardware; hardware looks like accessories, and the cheaper ones on the market are expensive, and the price difference is high; and the probability of problems in the daily use process is high.
Therefore, here, hundreds of treasure plates should remind everyone that a penny of goods, hardware accessories must choose a regular brand, not only quality is guaranteed and after-sales in place, the probability of being pitted will be much smaller!
2) Cabinet hinge quality identification skills: hinges can be said to be important hardware for the cabinet, to distinguish between the following points:
1 Damping: Damped hinges, when the door is opened less than 15°, it will slowly close and will not hurt your hand.
2 There are three types of hinges: full cover, half cover and no cover. The difference is whether the cabinet frame can be seen after the door cover is closed. Regardless of quality, look at personal preferences.
3) Three-section guide rail quality identification skills: the quality of the three-section guide rails is quite different, the quality is not good, the drawer will be difficult to pull out.
1 Look at the load-bearing: Pull the drawer completely out, press the outer edge of the front of the drawer by hand, and observe the front tilt of the drawer from the side. The smaller the forward tilt, the stronger the load-bearing capacity of the drawer.
2 Steel ball slides are better than silicone slides, which can automatically remove dust and dirt on the slide rails, and will not affect the sliding function due to dirt entering the interior.
With regard to the selection, purchase and use of the cabinets, it is all about the Baibao plate. If you still have unique tips, you can share it with everyone...
————————————
Top Ten Brands in China | Plate Joining | Top Ten Brands | Plate Brands | Sheets | Top 10 Brands of China
| Eco-board |Shandong plate | Eco-board top ten brands | Plate investment | Plate agent | Environmental plate | Health plate |
China Top Brand plate | plate 10 big brand-name goods | Chinese brand-name plate 10
Know how to love yourself
Create a trend home for people who love home
If you want to be environmentally friendly, choose a hundred treasures.
Public number: Baibao plate (bdbbc2013)
The official website of the top ten brands of plates, Baibaobao: http://
National free service hotline
Kaiping Yufa Sanitary Ware Co., is a factory specializing in designing, manufacturing, and selling of middle and high level bathtub faucets. We provide various styles of bathtub faucets. We offer bathtub faucet series including Floor Standing Bathtub Faucets, Wall Mounted Bath Shower Faucets, Deck-mount Bathtub Faucets. welcome to contact us for any inquiry in this area.
Bathtub Faucets,Bathtub Mixer,Bathtub Faucet,Shower Bath
Kaiping Yufa Sanitary Ware Co.,ltd , http://www.yufabathroom.com