Bogomar, Italy launches new electronic filling machine

Recently, Bogo Maggio of Italy developed and launched the CX Fillstar filling machine, which will play an important role in the beverage industry.

The CXFillstar new container back pressure electronic filling machine is a latest technological innovation project developed by Bogoma under the principle of electromagnetic flow meter. It is a versatile filling system capable of handling a wide range of bottle sizes and products with the highest product packaging quality and operational safety.

An annular tank is installed on the filling carousel, and the filling valve can handle various clear liquid products or liquid products with slurry and food fiber. Pneumatic control valve can be used to complete a number of filling operations. All operating parameters can be stored and extracted on the operating screen in front of the unit.

The CX Fillstar type filling tray is equipped with an external model bottle device at each filling valve for flexible insertion and removal of the model bottle. If this accessory is installed on the side of the filling tray, a separate model bottle can be used. The device can be CIP-cleaned with 121°C hot water. It is recommended to use the same diameter of the bottleneck. When changing the bottle size, it is not necessary to stop operation.

CXFillstar filling plate, existing DN50 to DN140 filling valve. When filling non-inflatable beverages, its production capacity is 18,000 to 67,500 bottles (1 liter)/hour; when filling inflated soft drinks, its production capacity is 18,000 to 55,000 bottles (1 liter)/hour.

There are three different types of filling: an aseptically-filled beverage in which the bottle and the nozzle are in contact, and a sterile, non-inflatable beverage in which the bottle is not in contact with the nozzle. This type of filling makes the separation of microorganisms closely associated with the filling of beverages.

Non-inflatable beverages and carbonated beverages in contact with the bottle and nozzle. This type of filling, including oxygen-sensitive products, requires the bottle to be rinsed during the filling process.

Specially designed "long tubing" for beer filling in PET bottles. In the filling process, it is controlled by three pneumatic valves - container pressure, filling and decompression. This type of filling requires that the CO2 is flushed twice in the container and then filled from the bottom of the container, which can greatly reduce dissolved oxygen.

According to the requirements of packaging containers and products, this filling machine is an extremely flexible filling system, which at the same time ensures that the device has higher operating performance and hygienic conditions.