Freehand production and output of some suggestions
1, on the text: General If you do the original manuscript, it is best to all the text to the curve. In this way, the output will not go wrong, it will also facilitate the output company, and it will be faster when it is released. Otherwise, wait for the output company to install the font before publishing and spending unnecessary time. Here, there is a question to remind everyone. If the text is within the clipping range, it is impossible to turn the curve without selecting the text alone. This point should be careful ~ ~ general if you want to check whether there is a full turn of the curve will use crtl + alt + e call out the find and replace the face plate, use the find "find any font" function to find.
2, on the link: the linked picture, or the old problem, remember to use CMYK mode. Although the RGB format can be automatically converted to CMYK output when the film is output, the color and the actual color are too different. When copying the disk, remember to check carefully whether all link files are copied.
3. About EPS: In FH, there is one thing to note when importing an EPS file. When you rotate the file, the white part of the picture becomes transparent (especially the bar code). This should be careful, in fact, is to show the reason, rather than really transparent, if you do not check it, there will be text bar code pressure. When it is time, it can only be repeated.
4, on TIF: If the imported file has TIF format, remember to check each file, whether there is a channel is not deleted clean. Because if the channel is not deleted, the output of the film will be more than a few colors (depending on the number of channels) and, if the output of the TIF file, do not use the compressed format, the output will be very slow.
5, on the gradient: After comparison, in all software output, the gradient of the AI ​​output is the most beautiful, followed by the PS, then FH and CD. So if there are gradients in the file, it is best to use PS to do a good job of importing FH. Because if it is a large area of ​​the gradient, FH output is also more prone to error, which depends on the quality of the output company that imagesetter. But if you use PS, then surely no problem.
6, on the imprint: This is to pay attention to whether there is no pressure and no pressure, what should not pressure and pressure. In general, black is automatically set to imprint when the output of the company is output. This means that even if your document has black text or color blocks that are not embossed, the output company will automatically set it at the time of export. FH has a very good function is to show the imprinted place, but there are several times even if the imprint can not see, be particularly careful: First, when the import grayscale file, you can set imprinting , but can't see it on display. Second, when using FH as a gradient, it is not possible to see if the gradient is set to imprint. Take special care in these two places.
7, on the effect: Generally speaking, in the FH, do not use "Apple + operation + D" (excuse me, forgot what the PC's shortcut key is) any effect of this panel version (this seems to be the first three except I haven't seen it until I have seen it.) More than 70% of organic rates can go wrong. If you must use it, be sure to communicate clearly with the output company.
8, on the registration color: In FH, its color registration function is very powerful. Can be displayed in each color version of the film, so there is a point of attention is to see whether the document in addition to the vertex outside the text or color blocks filled with register color, check method is ctrl + alt + e face version "Find" the "find color", select the cover color, range "document". Take a closer look and see if there are any other areas except the corner lines that are filled with registration colors.
Solid Wood Furniture,Solid Wood Office Furniture,Solid Wood Nightstand,Solid Wood Bedroom Furniture
Hebei Rukai Furniture Co. , Ltd. , https://www.wyrukaifurniture.com