New washing device for dairy beverage bottles

The nutritional value of dairy beverages is high, but it is also extremely easy to be contaminated and affect their shelf life. This places stringent hygiene requirements on the bottles. Incompatible with this is that some of our consumption habits and production conditions have caused great difficulties in the washing and disinfection of recycled bottles, such as drinking plastic straws, and even other debris thrown in the bottle; drinking The residue in the rear bottle was not flushed with water in a timely manner; the recovered bottles were piled in the open air. All of these have provided microorganisms with a large number of breeding opportunities, resulting in corrosion, mildew, and even solidification of residues in the recycled bottles. Therefore, the washing and sterilizing of recycled bottles has become a common problem in the industry.

In the past, there was relatively little demand in the dairy beverage market, and the output was not large. Some manufacturers used the pool to soak the bottles for a long time, either manually using a brush or using some semi-automatic bottle washing machines. The bottle washing efficiency was low, and the yield was low. High consumption and relatively poor health protection. With the needs of market competition and the continuous expansion of production scale, the previous bottle washing equipment and processes have been unable to meet the requirements of dairy manufacturers. The introduction of new and efficient bottle washing equipment has become inevitable.

Hefei Zhongchen Light Industry Machinery Co., Ltd. thinks of users and rushes to the urgency of users. Based on the technology of manufacturing a variety of bottle-washing equipment, it conducts extensive market research and collects opinions and suggestions from various parties. , Took the lead in the development and production of a series of YP-WT double-end bottle washing machine, this bottle washing machine is particularly suitable for the washing and disinfection of dairy beverage bottles. Since it was launched, it has been favored by users. For example, Shenzhen Chenguang Beverage Company successively purchased two YP532WT bottle washers of 28,000 bottles/hour, and Hong Kong Vita Food & Beverage Co., Ltd. also successively purchased two sets of bottle washers of this series, Guangzhou. Popular Milk Co., Ltd., Guangdong Yan Tang Milk Co., Ltd. and other manufacturers have also purchased such a bottle washer. The YP-WT double-end bottle washing machine currently has the following types of products: YP416WT, YP432WT, YP532WT and YP632WT. The production capacity is respectively 12000, 18000, 20000, 24000, 28000, 32000, 36000 bottles / hour and so on.

YP-WT series double-end bottle washing machine is fully automated in its feeding and platooning, and the operation is stable and reliable. In and out of the bottle each at one end, the end of the bottle can be set in a closed workshop, the dirty bottle was rejected outside the door, dirty and shunted to ensure hygiene. After the bottle enters the equipment with a special carrier box, it is firstly a pre-rinse of two recycled waters. At this time, the bottle is in an inverted state, and strong jetting can remove plastic straws, floating dust and other debris, greatly reducing the consumption of the washing liquid at the back. The pre-rinsed bottles are continuously soaked in the multi-tank washing liquid, and the washing liquid in the bottle is inverted once every one soaking tank. Through the effective control of the temperature and concentration of each bath solution, the inside and outside of the bottle are fully softened and reacted, and the bottle is subjected to strong lye jetting at a suitable position to completely remove the inside and outside of the bottle. After the lye is washed, the bottle is then immersed in a clear water tank for dilution and further immersion of the lye. Finally, a complete internal and external cleaning and disinfection is performed, including three secondary circulatory waters, three primary circulatory waters, and two new waters. Disinfecting water in the bottle to follow the flushing, plus a total of four bottles of external fixed irrigation, making the inside and outside the bottle to be fully washed and disinfected, after draining fully drained. The main drive of this type of bottle washer adopts stepless speed change, and each power transmission part is equipped with safety protection device, which has the functions of overload release torque and automatic shutdown of the fault to ensure safe and reliable production.

YP-WT double bottle washing machine is currently in the leading position in the domestic industry. It has all the advanced features of the previous beverage bottle washing machine and has added a lot of new features to the characteristics of the bottle of dairy beverages. First of all, the range of applicable bottle types is relatively wide. Wide-mouth and non-wide-mouth bottles, ultra-high- and ultra-short bottles are basically universal. Even able to wash some special specifications of the bottle. The second is to add a number of new washing process and its functional components. This is also the most important aspect, such as the new disinfectant flushing or high-temperature water flushing, etc. It meets the different requirements of different users in many ways. Although the bottles used by various manufacturers are not the same, the filling of dairy beverages is also various, and the bottle washing process used is not the same, but the washing and disinfection effects of the recycling bottles are obvious to all and have been widely recognized by users. And praise.