Instructions for human sex hormone binding globulin (SHBG) enzyme-linked immunoassay (ELISA)
Our company is a supplier of ELISA kits. The price is fair. The pre-sale, in-sale and after-sale services are at your service. Provide free test service, please call us!
Human sex hormone binding globulin (SHBG) enzyme-linked immunoassay (ELISA)
Kit instruction manual
This reagent is for research use only
Purpose: This kit is used to determine the content of sex hormone binding globulin (SHBG) in human serum, plasma and related liquid samples.
Experimental principle:
This kit uses the double antibody sandwich method to determine the level of human sex hormone binding globulin (SHBG) in the specimen. A microplate is coated with purified human sex hormone binding globulin (SHBG) antibody to make a solid-phase antibody. Sex hormone binding globulin (SHBG) is added to the monoclonal antibody-coated microwells in turn, followed by HRP-labeled sex hormone binding globule The protein (SHBG) antibody binds to form an antibody-antigen-enzyme-labeled antibody complex. After thorough washing, the substrate TMB is added for color development. TMB is converted into blue under the catalysis of HRP enzyme, and into the final yellow under the action of acid. The color depth is positively correlated with the sex hormone binding globulin (SHBG) in the sample. The absorbance (OD value) was measured with a microplate reader at a wavelength of 450 nm, and the concentration of human sex hormone binding globulin (SHBG) in the sample was calculated by a standard curve.
Kit composition:
Kit composition
48 hole configuration
96-well configuration
save
Instructions
1 serving
1 serving
Sealing film
2 pieces (48)
2 pieces (96)
sealed bag
1
1
Enzyme coated plate
1 × 48
1 × 96
Store at 2-8 ℃
Standard product: 2700ng / L
0.5ml × 1 bottle
0.5ml × 1 bottle
Store at 2-8 ℃
Standard dilution
1.5ml × 1 bottle
1.5ml × 1 bottle
Store at 2-8 ℃
Enzyme reagent
3 ml × 1 bottle
6 ml × 1 bottle
Store at 2-8 ℃
Sample diluent
3 ml × 1 bottle
6 ml × 1 bottle
Store at 2-8 ℃
Developer A liquid
3 ml × 1 bottle
6 ml × 1 bottle
Store at 2-8 ℃
Developer B liquid
3 ml × 1 bottle
6 ml × 1 bottle
Store at 2-8 ℃
Stop solution
3ml × 1 bottle
6ml × 1 bottle
Store at 2-8 ℃
Concentrated washing liquid
(20ml × 20 times) × 1 bottle
(20ml × 30 times) × 1 bottle
Store at 2-8 ℃
Precautions:
1. Crystals may be precipitated in the concentrated washing liquid, which can be heated and dissolved in a water bath during dilution, and the results will not be affected during washing.
2. The sealing film is limited to one-time use to avoid cross-contamination.
3. The sampler should be used at each step of sample addition, and the accuracy should be regularly checked to avoid test errors. It is best to control the sampling time within 5 minutes. If there are many specimens, it is recommended to use a volley gun to add samples.
4. The kit should be equilibrated at room temperature for 15-30 minutes before being taken out of the refrigerated environment. If the enzyme label coated plate is unopened, the strip should be stored in a sealed bag.
5. Please make a standard curve at the same time of each measurement, it is best to make a double hole. If the content of the test substance in the specimen is too high (the OD value of the sample is greater than the OD value of the first well of the standard well), please first dilute it with a certain multiple (n times) of the sample diluent and then determine it. When calculating, please multiply the total dilution Multiple (× n × 5).
6. Please keep the substrate away from light.
7. Strictly follow the instructions, and the test results must be determined by the microplate reader.
8. All samples, washing liquids and various wastes should be treated as infectious agents.
9. The components of different batches of this reagent shall not be mixed.
10. If there is any difference with the English manual, the English manual shall prevail.
Sample processing and requirements:
1. Serum: room temperature blood coagulates naturally for 10-20 minutes, centrifuged for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully and centrifuge again if a precipitate appears during storage.
2. Plasma: EDTA or sodium citrate should be selected as the anticoagulant according to the requirements of the specimen, mixed for 10-20 minutes, and centrifuged for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully. If a precipitate forms during storage, it should be centrifuged again.
3. Urine: collected in a sterile tube and centrifuged for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully. If a precipitate forms during storage, centrifuge again. Pleural and ascites, cerebrospinal fluid reference implementation.
4. Cell culture supernatant: When detecting secreted components, collect with a sterile tube. Centrifuge for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully. When detecting the components inside the cells, dilute the cell suspension with PBS (PH7.2-7.4), and the cell concentration will reach about 1 million / ml. Through repeated freezing and thawing, the cells are destroyed and the intracellular components are released. Centrifuge for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully. If a precipitate forms during storage, it should be centrifuged again.
5. Organize the specimen: after cutting the specimen, weigh it. Add a certain amount of PBS, PH7.4. Quickly freeze and save with liquid nitrogen for later use. After the specimen melts, it still maintains a temperature of 2-8 ° C. Add a certain amount of PBS (PH7.4) and homogenize the specimen with a manual or homogenizer. Centrifuge for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully. After aliquoting, a portion is to be tested, and the rest is frozen for future use.
6. The specimen should be extracted as soon as possible after collection. The extraction should be carried out according to relevant literature. If the test cannot be performed immediately, the specimen can be stored at -20 ℃, but repeated freezing and thawing should be avoided.
7. The sample containing NaN3 cannot be detected because NaN3 inhibits the activity of horseradish peroxidase (HRP).
Steps
1. Add sample: set up blank wells separately (the blank control wells do not add samples and enzyme-labeled reagents, the rest of the steps are the same) and the sample wells to be tested. Add 40μl of sample diluent to the test sample well of the enzyme-coated plate, and then add 10μl of the test sample (the final dilution of the sample is 5 times). Add the sample and add the sample to the bottom of the well of the microplate, try not to touch the wall of the well, shake gently to mix.
2. Dilution and loading of standard products: set 10 standard wells on the enzyme-coated plate, add 100 μl of the standard products in the first and second wells, and then add the standard products in the first and second wells 50μl of diluent, mix well; then take 100μl from the first well and the second well and add them to the third and fourth wells respectively, and then add 50μl of standard diluent to the third and fourth wells respectively, mix well; Then take 50μl each in the third and fourth wells and discard it, then add 50μl each to the fifth and sixth wells, and then add 50ul of the standard dilution solution to the fifth and sixth wells respectively, and mix well; After mixing, take 50μl from the fifth and sixth wells and add them to the seventh and eighth wells respectively. Then add 50μl of the standard dilution solution to the seventh and eighth wells respectively. Take 50μl from the eight wells and add them to the ninth and tenth wells. Then add 50μl of the standard dilution solution to the ninth and tenth wells. After mixing, take 50μl from the ninth and tenth wells and discard. (After dilution, the volume of each well is 50μl, and the concentration is 1800ng / L, 1200ng / L, 600ng / L, 300ng / L, 150ng / L)
3. Incubation: Seal the plate with a sealing plate and incubate at 37 ° C for 30 minutes.
4. Mixing solution: Dilute 30 times (20 times of 48T) concentrated washing liquid with distilled water 30 times (20 times of 48T) and then use.
5. Washing: Carefully peel off the sealing film, discard the liquid, spin dry, fill each well with the washing liquid, let it stand for 30 seconds and then discard, repeat 5 times and pat dry.
6. Incubation: The operation is the same as 3.
7. Washing: The operation is the same as 5.
8. Color development: Add 50μl of developer A to each well, and then add 50μl of developer B, mix gently, and develop at 37 ° C in the dark for 15 minutes.
9. Add enzyme: add 50μl of enzyme label reagent to each well, except blank well.
10. Termination: Add 50μl of stop solution to each well to stop the reaction (at this time the blue will turn to yellow).
11. Determination: Measure the absorbance (OD value) of each well in sequence with the blank air conditioner at zero and 450 nm wavelength. The measurement should be carried out within 15 minutes after adding the stop solution.
Kit performance:
1. The correlation coefficient R between the linear regression of the sample and the expected concentration is above 0.95.
2. The batch and approval shall be less than 9% and 11% respectively
Calculation:
Taking the concentration of the standard as the abscissa and the OD value as the ordinate, draw a standard curve on the coordinate paper, and find the corresponding concentration from the standard curve according to the OD value of the sample; then multiply it by the dilution factor; Calculate the linear regression equation of the standard curve with the OD value, substitute the OD value of the sample into the equation, calculate the sample concentration, and multiply it by the dilution factor to obtain the actual concentration of the sample.
examination range:
100ng / L -2000ng / L
Storage conditions and validity period:
1. Store the kit: 2-8 ℃.
2. Validity: 6 months
When it comes to removing unwanted hair, you have options. With so much misinformation available about these options, it can be difficult to know which one(s) is best for you. To help you make an informed decision, here are the basic facts that dermatologists share with their patients about 7 popular ways to remove unwanted hair.
Shaving
When you shave, the razor cuts the hairs at the surface of your skin so that you cannot see the hairs.
Fast facts: Here are the long and short of shaving:
You can shave any area of the body.
You can quickly learn how to shave.
Shaving is painless (unless you cut yourself), unlike waxing or laser hair removal.
The results are short-lived, so you may need to shave daily or every few days to maintain your results.
Frequent shaving can irritate your skin.
Injuries, such as cuts, nicks, and razor burns, happen.
Some people who shave develop ingrown hairs.
How to get the best results: The following tips from dermatologists can help you reduce injuries and get a close, comfortable shave.
How to shave: For men and women - Discover 6 simple steps that can help you get a clean, comfortable shave and minimize irritated skin. (video)
How to shave your face - Men, using the right technique can go a long way toward getting soft, smooth, and hairless skin. (video)
7 ways to prevent injuries while trimming pubic hair - Find research-proven ways to reduce these all-too-common injuries.
Waxing
You apply wax (hot or cold) to your skin and then quickly remove it, which pulls out the hairs.
Fast facts: Here are the cold facts about this option:
The results can last a few weeks or longer.
You can wax any area of your body, including large areas, such as your legs, and delicate areas, such as the skin above your upper lip.
Waxing takes practice to learn.
Removing the wax can be painful.
Your newly waxed skin can be red and irritated for a short while after you wax.
If the wax is too hot, it can burn your skin.
How to get the best results: These dermatologists` tips can help you keep it safe and effective:
Waxing is not recommended if you are currently:
Taking isotretinoin (a prescription medication approved to treat severe acne) or have taken it within the past 6 months.
Using an antibiotic
Applying tretinoin (also known as retinoic acid) to your skin.
These medications thin your skin. When the wax is removed, your skin could tear.
If you wax at home, be sure to see what dermatologists recommend by watching this short video, Hair removal: How to wax.
If you go to a salon for a wax, make sure the estheticians:
Use wooden sticks rather than a metal spatula to apply the hot wax.
Dip an unused wooden stick into the wax each time they apply wax to your skin.
Dipping the stick into the wax more than once is called double dipping. This unsanitary practice can transfer bacteria and other germs from previous clients to you. Heated wax is not hot enough to kill bacteria and other germs.
Depilatories
You apply a cream, lotion, or gel to the skin, which can dissolve unwanted hair.
Fast facts: The following can help wash away any misconceptions about using a depilatory:
The results tend to last longer than when you shave.
It`s quick and easy to use at home. You simply apply, wait, and rinse off the product at the time stated in the instructions.
These products can irritate your skin, so dermatologists recommend that you test them. (instructions below under How to get best results from a depilatory).
Some people can use a product for months or years before it starts to irritate their skin.
Some people dislike the odor of these products.
How to get the best results from a depilatory: Always, test first. Before using a depilatory for the first time or using it on a different part of your body, here`s how to test the product:
Apply a small amount to an area on which you want to use it.
Keep it on your skin for the time stated in the instructions (or until your skin starts to burn or sting).
Rinse it off immediately and thoroughly at the time stated or at the first sign of burning or stinging.
If you experience burning or stinging, don`t use the product. Find another depilatory to test.
If within 24 hours of applying the product you don`t have a skin reaction, you can use the product in that area.
China Depilatory Suppliers
DELIN HAIR COSMETICS , https://www.hairdyecolorfactory.com