Special floor should be used for heating

Not all wooden floors can be used to warm floors, and it is best to use floor heating.

The floor heating system achieves heating by heating the floor, and the floor maintains a high temperature. The ordinary floor is prone to deformation under such circumstances. Therefore, after installing the floor heating system, you must choose the floor suitable for the floor heating system.

Laminate flooring is the main force

According to the working characteristics of floor heating, the floor heating floor should meet three conditions: 1. Adapt to repeated changes of cold and heat, small deformation; 2. Conducive to heat conduction; 3. Moisture resistant and waterproof.

Since wood is a poor conductor, the greater the thickness, the more unfavorable for heat conduction. At present, most of the floors on the market, such as 12-18mm thick solid wood flooring, bamboo flooring, ordinary solid wood composite flooring and laminate flooring with a thickness of more than 8mm are not suitable for the ground heating radiation system, otherwise it will affect the heat conduction or cause the floor deformation. .

In the same environment, the solid wood floor has the highest deformation rate, followed by the laminate flooring, and the solid wood composite floor has the smallest deformation, because its substrate is horizontally and vertically staggered and mutually restrained; the back also has dense anti-deformation grooves, decomposition The stress generated by the heated surface.

The thermal conductivity of the floor is related to the thickness of the floor. The thickness of the parquet is similar to that of the laminate. The difference is that the anti-deformation groove on the back of the parquet is good for air circulation and reduces noise. The surface of the laminate is resistant to metal oxide. In the grinding layer, the heat spreads very quickly and evenly on the surface, and the indoor temperature is easy to control.

However, the surface of the multi-layer solid wood composite floor is thin, not easy to care for, can not be refurbished, affecting the service life, and the price of the three-layer solid wood is relatively expensive. In view of the above problems, the laminate flooring has always been the main force of the geothermal floor. The laminate flooring has obvious advantages in terms of floor deformation rate, surface wear resistance, cleaning and maintenance.

In addition, the floor quality pays attention to "three-point floor, seven-point installation", while the professional floor heating installation standard is higher, so it is best to provide professional installation by the manufacturer to avoid self-installation by the construction team.

Meat Processing Machines

As one of the earliest enterprises specializing in meat food processing machinery, Helper Group integrates research and development, production, sales and service in the modern management system. Our company has now set up scores of equipment used in the field of meat processing such as frozen meat breaker series, meat block grinder series, chopper and mixer series, saline injector series, tumbling machine series, smoke oven series, filling machine series, sausage linker series, clips tying machine series etc.We also provide sausage lines,vacuum sausage filler,vacuum stuffer.



meat processing machines overview

Sausage Separator Series,Chopper And Mixer Series,Clipping System Solutions,Sausage Lines,Vacuum Sausage Filler,Vacuum Stuffer

Helper Machinery Group Co., Ltd. , https://www.helperfoodtek.com