Introduction to the performance and process advantages of steel doors!
There is a misunderstanding in the understanding of many consumers. When it comes to filling paper in the door, it feels inferior products, and buying furniture is very important to think that it is good furniture, but it is not. This kind of environmentally friendly honeycomb paper is an internationally-used built-in filler, which not only bears strong pressure, but also has light weight. The reduced resource consumption and transportation cost are very beneficial to both merchants and consumers.
The use of new materials is also the source of its competitive advantage, which solves some of the inevitable defects of solid wood doors.
First of all, the surface of the steel plate is very flat, and it is difficult to achieve this effect in solid wood. And the cracking and discoloration of the surface of the wooden door is fatal, but the PVC film used on the surface of Maxim's steel door does not have this problem. Even after more than ten years or long exposure in the sun, it will not change or crack. .
Secondly, the moisture-proof performance of steel-wood doors is incomparable to wooden doors. In the past, the doors used by kitchen and bathroom in the family were all plastic-glazed. If wooden doors were used, it would easily be deformed by moisture, so the door of the kitchen and bathroom in the home would be very uncoordinated. . However, there is no such problem in Maxim's steel doors. As long as it is not in the water, there will be no problem, and PVC's various patterns can also make the entire space maintain a consistent decoration style.
Steel-wood doors are heavy, and the requirements for door covers and hinges are much higher. Therefore, friends who are ready to install steel doors are advised to think ahead and be prepared. Steel door panels are more prone to problems. Friends in the southern part of China, hesitant to change the climate, the door can be cracked and other issues. Therefore, it is conceivable to use a high-density plate to attach the steel plate Nowadays, the brands of steel-wood doors in the market are increasing, and the small brands are often not technically strong. Therefore, it is more likely to have problems in terms of quality, which brings a lot of trouble to consumers' choices. Therefore, it is recommended that you use large brands and large manufacturers when purchasing.
The surface of the steel-wood door is molded by a large hydraulic machine. It has a strong three-dimensional effect and can provide a wide range of styles. The product lines are smooth and the styles are diverse. The industrial steel doors and doors are extremely small in tolerance, and the various parts of the door are tightly combined, sealed and highly consistent. . In terms of appearance, the steel-wood interior door has a strong sense of three-dimensionality and a variety of colors, which can meet the consumption needs of different consumers.
Steel-wood doors do not need to be painted at all during the production process, and the materials used in the process are relatively small, so the environmental performance is quite good, almost zero pollution. Of course, the prominent advantages of steel-wood doors in the market are far more than these. Consumers can check the relevant materials in advance during the purchase process to understand the steel doors.
Mianyang Crossing Cross-Border E-Commerce Co., Ltd. , https://www.wycybag.com