Printing machine plastic scraper squeegee
After years of development, the laser imagesetter has been fully mature in technology, stable and reliable in performance, diverse in functions, complete in variety and specifications, well-served in place, with a large user base and a large market share. It is difficult in the short term. Was replaced. In addition, the majority of laser phototypesetting machine manufacturers and film manufacturers still recognize the use of film, and more importantly, they are constantly developing laser phototypesetting technology. This article will introduce you to the plastic scraper blade of the printing press.
The imagesetter has given the printer the ability to reach digital production, indicating a conversion process, which in turn has contributed to the development of CTP. The imagesetter as a CTP intermediate program allows the print operator to feel intimate and secure enough.
Many people say that there is no market for the photo machine, but this is not the case. After the film-free direct plate-making imaging process has attracted extensive attention, due to the use of phototypesetting machines, and the developer's investment in research and development and the continuous development of new imagesetters, it is known that the imagesetter still has commercial printing scope. The power that drives the action.
The peripherals of the phototypesetting machine, including the plate feeding and discharging equipment. In the future, the production level of the platesetters will be improved, and these peripheral devices are required to have a higher processing speed. However, as the processing speed increases, the feeding and discharging of the plates becomes more important.
In the specific CTP version of the use of the following should pay attention to the following: CTP plate material use and storage conditions temperature of 20 ° C -25 ° C, humidity of 40% -60%, because the photosensitive CTP version is sensitive to temperature and humidity, must Pay attention to the high temperature and high humidity environment in summer; the life cycle of the developer is from 3 weeks to one month. Replace the developer to clean the developing machine while replacing the developing filter; check the circulation of the developing solution at regular intervals, and the pH of the developing solution fluctuates within the range of 11.75- Between 12.25; CTP version should be carefully checked before the output of the network parameters, such as the number of hanging network lines, output resolution, appropriate linearization options, corresponding printing anti-compensation.
Article source address: http://
Lighter supporting facilities, lighter air pump, air pump, water tower, fire-fighting facilities, lighter factory, lighter manufacturer, lighter manufacturer, lighter wholesaler, lighter craft, lighter manufacturing san'jianLighter supporting facilities, lighter air pump, air pump, water tower, fire-fighting facilities, lighter factory, lighter manufacturer, lighter manufacturer, lighter wholesaler, lighter craft, lighter manufacturing san'jian
Lighter Flame Adjusting Machine,Lighter Equipment,Llighter Production Equipment,Lighter Supporting Equipment,Lighter Machine
Hunan Feituo Automation Technology Co., Ltd. , https://www.feetoolighter.com