Storage and transportation requirements for non-slip rubber pads

Non-slip insulating rubber pads are widely used. As a non-slip insulating rubber pad, compared with ordinary insulating rubber pads, the characteristic of anti-slip is increased. Therefore, it is more beautiful, shockproof and non-slip during use. The scope of application is also quite extensive, used for substations, power plants, power distribution rooms, test rooms and some live live operations. However, because of its insulating properties, it should be stored in a dry and ventilated environment during storage, away from heat sources, and more than 20cm away from the ground and walls. And avoid corrosion by acid, alkali and oil to ensure the performance and integrity of the rubber pad, and can not be exposed to direct sunlight in the open air so as to avoid aging.

It should also be noted that if you buy a layer of film on the surface of the rubber pad, you must remember to tear it off. The film is only the packaging during transportation. In order to prevent slipping during transportation, it will affect the surface of the insulating rubber pad, but it must be used when it is used. Peel off.

For maintenance, use soapy water every six months. Insulating rubber pads should be kept dry and clean, pay attention to prevent contact with acids, alkalis and various kinds of substances to prevent aging, cracking or sticking after corrosion, thereby reducing the insulation performance.