New standards for wood-based panels in the furniture industry
Guide: On May 1, 2018, the new national standard "Restriction of formaldehyde in wood-based panels and their products for interior decoration" was officially implemented. As the only mandatory national standard in the industry of wood-based panels and their products, the implementation of the new standard will be Bring significant impact to the industry.
On May 1, 2018, the new national standard "Formaldehyde Emission Limit in Wood-based Panels and Products for Interior Decoration" was officially implemented. As the only mandatory national standard in the wood-based panels and products industry, the implementation of the new standard will be for the industry Have a major impact.
1. The standard difference between old and new wood-based panels
When it comes to furniture standards, in addition to domestic standards, there are international standards and corporate standards. International standards are higher than domestic standards, and some enterprise standards are higher than domestic standards.
Putting the three standards together, it often dazzles consumers of panel furniture. In addition, there are mandatory national standards, because there are as many as three detection methods, and there are three sets of index parameters, which is also very complicated to convert.
Before the new standard for wood-based panels that was implemented on May 1, the standard followed by domestic furniture manufacturers was the "Formaldehyde Emission Limit in Wood-based Panels and Products for Interior Decoration" (GB18580-2001), which was implemented in 2002. The only mandatory national standard in the board and its products industry.
This standard means the "bottom line" of national supervision and the "red line" of industry production, that is to say, the state requires that the formaldehyde emissions of wood-based panels and their products must meet the requirements of this product, which is also to test whether the formaldehyde emissions of products are qualified in accordance with.
For more than ten years, this standard has played an important role in regulating the development of the industry, improving the environmental performance of products, and protecting the health of consumers. Consumers ’awareness of environmental protection of plates has also come up.
In the GB18580-2001 standard, China's wood-based panel formaldehyde emission limit standards are divided into two levels: E1, E2.
E1 is a wood-based panel that can be directly used indoors, and E2 is a wood-based panel that must be used for interiors after finishing. For the E1 grade artificial board, if the dry bath method is used for testing, the amount of formaldehyde released per cubic meter shall not exceed 1.5mg; if the climatic chamber method is used for testing, the amount of formaldehyde released per cubic meter shall not exceed 0.12mg.
In contrast, GB18580-2017 "Restriction Limits on Formaldehyde in Wood-based Panels and Products Made from Interior Decoration", which began on May 1, 2018, stipulates that the formaldehyde release limit is 0.124 mg per cubic meter, and the limit mark is E1, canceled E2 level of the original standard.
Simply put, after the implementation of the new regulations for wooden wood-based panels, the original E2 grade wood-based panels can no longer be produced and sold. The three previous cumbersome methods for wood-based panel testing have also been simplified into one, namely, a cubic meter climate box testing method. There is only one standard for the formaldehyde emission limit, that is, it cannot exceed 0.124 mg per cubic meter.
The E0 grade (≤0.5mg / L) that often appears on the market appears as a recommended standard in "Plywood" (GB / T9846.1-9846.8), and is not mandatory.
2. Furniture companies with "pursuit" do not feel uncomfortable
The new standard has been promulgated on April 22, 2017, and will be implemented on May 1 this year. During this period of more than a year, it is reserved for wood-based panel companies and furniture companies to handle E2-level wood-based panels and their products.
In the past, although some companies will use E2 grade plates to reduce costs, but due to the needs of market competition, many companies still actively improve the material safety standards, and early use of E1 grade plates to gain consumer favor. Some companies even use E0 grade plates to increase the reputation of their products.
Furniture companies that have long been aligned with international standards and have used E1 grade panels for many years are not sensitive to the implementation of the new standard. Many well-known panel companies have used the new standard to implement the brand marketing to take advantage of this. The May 1st holiday took off the "green" wind.
It is understood that many customized furniture companies have worked hard on raw materials for plates as early as many years ago. They have also competed with each other as their key indicators and popularized the environmental protection of plates for consumers. Therefore, the implementation of the new target has little impact on them, but it has virtually helped them clean up some competitors who fight the price war, so that the healthy and sustainable development of the entire industry has a brighter prospect.
3. The promotion effect of new standards on furniture enterprises
Some people in the industry said that the implementation of the new standard will be a good standardization measure for the wood-based panel industry, just like environmental protection. Most wood-based panel companies have moved toward environmental protection and formalization, and their production standards have reached E1 and even E0 levels. . Those wood-based panel companies that have not yet undergone a green transformation will be forced to restructure or withdraw from the market.
Environmental protection is the general trend, and the introduction of new regulations for wood-based panels has made China's wood-based panels standard internationally. This is a manifestation of consumption upgrades, and it is also a manifestation of people's daily life to a higher standard.
It is believed that the implementation of the new regulations will also help to transform the overall image of wood-based panels and allow wood-based panel companies to gain new market momentum.
Children's furniture manufacturer The company's Health Equipment Co., Ltd. mainly produces kindergarten furniture, outdoor children's slides, kindergarten toys, fitness equipment, outdoor expansion equipment, naughty castles, etc. It is a technology-based enterprise integrating design, production, sales and after-sales. . Website:. Consultation telephone. Our company is happy to serve you wholeheartedly! Factory address: No. 16, Chuangqiang Road, Light Industry Industrial Park, Lucheng District, Wenzhou City.
1. Classification of children's furniture:
According to the material: plate children's furniture, solid wood children's furniture, plastic children's furniture, metal-wood combined children's furniture
Divided by style: Chinese style, Mediterranean style, Aegean style, Nordic style, European castle style, American pastoral style
2. Material of children's furniture:
1. Artificial board children's furniture: particle board, MDF, plywood, fireproof board, composite multilayer board
2. Solid wood children's furniture: The main wood used by the company is Russian Pinus sylvestris var. Mongolica and African rosewood imported from Africa
3. Enterprise and product certification:
The company's products meet:
1. EU CE, TUV toy safety standard system certification!
2. International Organization for Standardization certification system: ISO9000, ISO14000, OHS18000 three system certification.
3. Domestic certifications include: GB / T29490-2013 intellectual property management system, Chinese environmental label, safety production management system and other certifications.
Four, product implementation standards
GB 28007-2011 General technical requirements for children's furniture
GB / T 3324-2008 General technical requirements for wooden furniture
GB / T 24024: 2001 Environmental Labeling and Declaration
HJ 2547-2016 Technical Requirements for Environmental Labeling Products-Furniture
5. The price of children's furniture
The price of children's furniture in the market varies depending on the material and manufacturer, but we remind consumers not to buy "three no" products. For products without qualifications and test reports, even if the price is low, you can't buy Because products with low prices are not guaranteed, their materials are definitely the lowest. Therefore, we recommend that you choose a large qualified company, because quality, qualification, and safety are proportional to the price.
The children's furniture produced by our company is sold at factory prices without intermediate links and at reasonable prices. It is your best choice.
Temperature Measurement Module
The self-service temperature measurement module is a self-service temperature measurement board developed based on STMicroelectronics chips. The industrial-grade main control chip is selected to ensure system reliability. This module is equipped with an infrared temperature measurement sensor, with high precision and high reliability.
Infrared Temperature Measurement Module, Thermal Imaging Camera Module, Body Temperature Measurement Module
Guangdong Zecheng Intelligent Technology Co., Ltd , https://www.szzcsecurity.com