Yajia gas stove repair points Yajia gas stove recommended

In the TV report, we can always see some reports of explosions and fires in the home after using three unbranded gas stoves. Because it also sounded the alarm for people. When buying a gas stove, be sure to buy a product with a big brand and quality assurance. Among them, the Ajia gas stove is a very good choice, then let's take a look at the Ajia gas stove in the end is good?

Yajia gas stove repair points

çš„

The first step in repairing the Yajia gas stove: Huang Yan is the flame when the gas is not completely burned. The flame is red and yellow. The burning of the flame seems to be very hot. In fact, the flame is soft and weak, the heat efficiency is very low, and the bottom of the pot is made. Carbon deposits not only waste gas, but also cause air pollution.

The second step of repairing the Yajia gas stove: the combustion process of the gas stove: when the gas stove is in use, the gas is injected into the burner (that is, the heavy iron shovel under the fire cover), first in the burner and from the damper The air coming in at the same position is mixed - forming a gas and air mixture, and then coming out to burn at the fire hole, which will make the combustion more adequate.

The third step of repairing the Yajia gas stove: the artificial gas is a combustible gas made from coal or heavy oil as the main raw material, so it contains more impurities and the impurity content is also unstable. When mixed with air, it cannot be fully mixed with oxygen. The ignition speed is slowed down. At this time, the nozzle is still providing gas to the combustion chamber. Therefore, when the gas reaches the ignition point, the gas cannot be burned at once, causing the gas flow rate to be higher than the combustion speed, so that a fire may occur. But this does not affect normal use. We can solve it by gently turning the knob {of course to press} to ignite and then adjust the size of the fire.

Yajia gas stove recommended

It is reported that the Yajia gas stove is a gas product produced by Ningbo Yajia Kitchenware Co., Ltd. The main components of the gas stove are imported from Germany and Italy. The production process is based on international advanced production technology. Performance and process are superior to other brands of gas stoves. In addition, Yajia gas stoves are affordable and cost-effective, and are very popular among consumers. With an annual production capacity of more than 500,000 units, the products are exported to Europe, Africa, America and other countries and regions.

The cost performance of Yajia gas stove is relatively high. The service of Yajia gas stove is perfect. It can provide consumers with 3/6/12 months full free warranty service according to the different replacement parts. In addition, the Ajia gas stove can also provide consumers with a service to clean the gas stove every 2 years. Regular cleaning of the gas stove can effectively extend the service life of the gas stove, and at the same time reduce the probability of gas stove failure.

Although the brands of gas stoves on the market are springing up in the spring, the Aojia gas stoves always adhere to their original intentions, producing a stove product that every consumer can rest assured. Nowadays, in order to meet more and more people's new requirements for gas stoves, Ajia gas stoves are constantly being updated, and more and more products that meet people's needs are launched.

Electric Grinder Mill

Electric Mill Grinder,Electric Mill Grinder Grinder High-Speed,Electric Salt Mill,Automatic Pepper Grinder

Yongkang Lianyang Industry & Trade Co., Ltd , https://www.yklianyangs.com