What is the method of gas stove repair? Pay attention to what?
The gas stove is the most frequently used appliance in the kitchen. After using it for a long time, it will inevitably encounter some sudden glitch. Don't worry, the following small series sorts out some of the troubleshooting methods for the common faults of Vantage gas stove repair. You don't need a maintenance master, you can easily solve it at home! Next, let's learn about the method of repairing Vantage gas stove with Xiaobian~
Question 1: The gas stove has not been on fire
1. The ignition electrode has no spark or weak spark: it may be that the battery is installed incorrectly or the battery is dead. At this time, you only need to install the battery correctly or replace it with a new one.
2. There is a flame at the time of ignition but the hand is turned off: it is possible that the knob is not pressed. When you open the gas stove, press the knob down to the end, rotate 90 degrees to ignite, keep the voltage for 3-6 seconds, and then let go.
3. The ignition electrode has sparks but no ignition or no flame: check whether the ventilation hose of the gas stove has flattening or bending. Sometimes the small partners do not leave enough space for ventilation when installing the gas stove. The hose will squeeze the pipe and cause the gas to be transported poorly. At this time, the soft management will be smooth.
Question 2: Open or close the cabinet door cooker
When cooking, he is busy switching the cabinet to take things, but the fire on the stove is extinguished. This is because the embedded gas stove belongs to the lower intake gas stove, and the switch of the cabinet door will have an effect on the flame. Insufficient air intake or excessive air supply in the cooker causes a flameout. Therefore, it is recommended to open the air intake hole on the cabinet door. One is to ensure the air supply, and the other is to buffer the effect of the switch cabinet on the flame. If the hole cannot be opened temporarily, try not to switch the cabinet door or lightly during the use of the cooker. Open the door and close the door!
Question 3: Produce yellow fire, red fire and black pot bottom
There are many possibilities for this phenomenon, such as: the spill causes the inner and outer ring fire cover to have impurities; the gas source has impurities causing the flame to discolor; the nozzle has foreign matter; the cabinet is too tight, the ventilation is not smooth; the gas pressure in the home is too high, etc. Wait. This requires regular cleaning of the gas stove to prevent the stove eye and nozzle from accumulating excessive impurity oil; carefully correct the position of the fire cover so that the nozzle and the burner are on the same axis; if it is a gas pressure problem at home, then it is necessary Coordinated with property and gas supply companies.
Pay more attention when using:
Even the best gas stoves, usually also pay attention to develop good habits, in order to reduce the occurrence of failures and reduce the probability of repair. For example, do not put or put less things in the cabinet space at the bottom of the cooker; do not violently switch the door when cooking, and try to reduce or avoid the overflowing phenomenon when cooking; after use, after the stove is cooled, properly wipe the cooker, debug The fire cover keeps the cooker from being obstructed by dirt and dirt.
The above is a detailed answer to the repair of Vantage gas stove, I don't know if you are satisfied with the introduction of the decoration home network Xiaobian~ If you want to know more about the exciting content of the Vantage gas stove repair, please continue to pay attention Our kitchen and bathroom appliances section!
More related wonderful reading:
How is the Vantage gas stove repair? Vantage gas stove precautions
Home Bookcase,modern bookcase,luxury bookcase,minimalist bookcase
Foshan Poesy Furniture Co., LTD. , https://www.poesyfurniture.com