Custom Wardrobe "Technology Quest": The Secret of "Back Plate Bone"

[ Chinese wardrobe net ] When the wardrobe is placed in the home space, under normal circumstances, it is standing against the wall, so the largest contact area with the wall is actually the back panel of the wardrobe. Looking at the current custom wardrobe products, the cabinets are usually made up of five whole boards, which are a single board directly nailed to the two side panels.

When the southern "South Wind Day" comes, if the quality of the indoor wardrobe is not too hard, and the appropriate moisture-proof measures are not taken, the clothes and bedding stored in the closet will be mildewed and smelly. The federal "Golden Back" process of the Gordon can effectively improve the moisture and moisture resistance of the wardrobe.

The so-called "back plate bone" is two long and narrow plates that appear in pairs. They are like two skeletons, one left and one right connected to the left and right side plates. The groove is centered on the opposite side of the two "back plate bones", and then the whole piece of the back plate is inserted from the groove, so that the back plate and the two back plate bones are engaged with each other, and the inlay is tightly stitched. At this point, the inserted back panel does not lean against the wall, and a 6 mm gap is created in front of the laminate. This is the “back bone” process of the Federal Gordon.

The "back plate bone" process enhances the stability of the entire wardrobe, the cabinet is not easily deformed, and the slot-type design makes the installation more convenient and quick, and can be disassembled without affecting the use and appearance of the wardrobe. Since the backboard does not lean against the wall, a certain distance is left between the wall and the wall, effectively isolating the moisture that the wall may bring. In the interior of the wardrobe, because a 6mm gap is formed between the backboard and the laminate, the air circulation inside the entire cabinet can be enhanced, and the accumulation of dust inside the cabinet and the odor caused by poor air circulation are solved. The Federal Gordon product has the origin of "the wardrobe that will breathe."

In 2004, the Federal Gordon pioneered the “back-bone” process in the industry and has been adhering to it today. The wardrobe with the back bone structure also makes the Federal Gordon products stand out in the custom category and has a clear recognizability.

Household Cleaning Products And Accessories

Household Cleaning Products And Accessories,Cleaning Cloth,Oil Removal Dishwashing Cloth,Thickened Suction Kitchen Artifact

Huayao Master (Puyang) Automation Equipment Co., Ltd. , https://www.huayaolive.com