Set door waterproof three steps
Waterproofing the door is critical to extending the life of the door. The set door manufacturer summarizes the three steps of the waterproof treatment of the set door, including: waterproof treatment during the processing of the set door, waterproof treatment during the installation of the set door, and waterproofing during the use of the set door. Only when these three steps are done can we ensure that the door is truly waterproof.
The first step of waterproofing, for the waterproofing of the door processing process, mainly includes material selection and processing. Material selection, generally natural wood is uneven and uneven, the density is large, the density of wood, the door is easy to get wet and deformed, so generally choose those dense points of wood, in addition, the selected wood is generally They all contain different degrees of moisture. The wood needs to be dried before processing to reduce the moisture of the wooden door. Therefore, the wooden door is not easy to be wet when it is used, and the quality is better during the processing. The door manufacturer will make a waterproof edge process on the back of the door. The waterproof process is good or bad. The effect is very different. The good quality door manufacturers generally do 1mm wide waterproof edge treatment on the back of the door. Careful, the paint can be combined with the melamine paper on the back of the door panel to prevent moisture from entering the substrate during use. These measures can improve the overall waterproofing of the door.
The second step of waterproofing, the waterproof treatment during the installation process of the door, how about the waterproof effect of the set door? It also has a certain relationship with the installation, especially the door of the bathroom should pay special attention. When installing the bathroom door, please pay attention to: 1. The door stone must be installed one centimeter higher than the bathroom floor, so that there will be no water in the place where the paint-free door is installed when bathing. 2. The door cover of the bathroom can not be grounded. Usually, the lower end of the door cover is required to be separated from the floor tile by 5 mm and filled with sealant. 3. The upper and lower ends of the door leaf of the bathroom should also be painted and closed. 4. The door of the bathroom is bumped. If the painted surface is damaged, it should be repaired in time to avoid further damage. 5. Conditionally apply waterproof wax to the bottom of the wooden door for double insurance. For the general room door, it is best to equip each set door with waterproof glue, which can greatly reduce the chance of water entering the door cover, and fundamentally eliminate the moisture and mildew of the wooden door.
The third step of waterproofing, the waterproofing of the door in the process of use, this is also more important. If the first two steps are completed, this step is not done well, it will also shorten the life of the set door, so it is necessary to make the door of the set. maintenance. It is best to use a protective wax or a special cleaner to balance the appearance of the wooden door, and then slowly wipe it. In hot weather, it is best not to use a cloth with water to clean it. Put some moisture-absorbing boxes and dehumidification products such as activated carbon on the side of the door. These things also have the function of opening windows or using air-conditioning to ventilate the air in the house. In addition, the flowers in the house can be placed on the balcony, can not be placed next to the door, to avoid water leakage during the watering, so that the ground foam, so that the wooden door can not be closed. The dust on the door panel can be removed by a vacuum cleaner. It can also be wiped with a soft, dry cotton cloth or silk. Wiping with a hard or hard medium may scratch the surface; if the door panel of the interior door has serious stains. You can use a neutral detergent or a special cleaning agent for furniture. After cleaning the stains, dry them again. Pay attention to the immersion of neutral detergent or water rag. Do not leave it on the surface of the wooden door for a long time, otherwise it will impregnate the surface of the door to discolor or peel the surface finish material. Do not use the hand with water stains to open the door lock frequently to avoid discoloration of the door lock. When opening the door lock or turning the door lock handle, do not use excessive force to reduce the door lock life. Frequently-moving hardware such as hinge locks should be tightened immediately when loose. When the door lock is not working properly, you can add an appropriate amount of pencil core to the keyhole. In fact, in the process of using, try to keep the water and the door at a certain distance. If the paint falls off or the door is moldy, contact the manufacturer in time to avoid missing the best processing time and shorten the service life of the door.
The above three steps of waterproof treatment are indispensable, only three steps are done, in order to ensure that the waterproofing of the door is really effective, so consumers should pay attention to see if the purchased door is specially waterproof when purchasing the set door. Disposal, as well as waterproofing is not in place, and keep the door away from moisture during use, and maintain the door.
Document.body.oncopy = function () { setTimeout( function () { var text = clipboardData.getData("text"); if (text) { text = text + " This article comes from China Wooden Door Network, China's well-known wooden door industry portal Website! (http://) Detailed reference: "+location.href; clipboardData.setData("text", text); } }, 100) }Lounge chair,High Quality Lounge chair,Lounge chair Details, CN
Queen Furniture Co., Ltd. , https://www.queenfurnitures.com