God's Voice: End-users talk about packaging quality

Pharmaceutical companies - AstraZeneca

AstraZeneca's pharmaceutical packaging is based on blister packs. Currently, there are six blister packaging lines. In 2004, the company produced blister-packed drugs that accounted for more than 95% of locally produced pharmaceuticals. Other packaging formats include easy-to-push, Easy to tear double aluminum blister packaging and blister packaging and flexible packaging combination packaging.

1. Quality Requirements for Pharmaceutical Packaging Materials

At present, the printing and packaging materials used for the packaging of medicines are aluminum foil, (paper-plastic, aluminum-plastic) composite film, paper for printing labels and instructions, and cardboard for production carton. According to whether the packaging materials and the drugs are in direct contact, the quality requirements for the materials are also different. For aluminum foil, composite film and other internal packaging materials, the safety and sanitation of the material itself is the primary consideration. The material composition should not contain harmful substances, no toxic additives, and no impurities, no reaction or adsorption with the contained drug, etc. The problem of cabinet solubility, printing ink can not be in direct contact with the drug. The amount of residual solvent in the adhesive is within a limited range, and there is no odor in the heat seal layer. Insects, hair, adhesives, dirt, material debris and other impurities are strictly forbidden, and the inner packaging material is required to have certain resistance; medium-strike, pressure-resistant, tensile-resistant, and anti-broken and other mechanical strengths to provide basic protection for medicines. Features. In addition, according to the specific requirements of the drug, the inner packaging material itself should also have good barrier properties such as moisture-proof, oxygen-barrier, gas-barrier, shading, and fragrance-preventing, and have good high temperature resistance, light resistance, cold resistance, chemical resistance, etc. Anti-aging and other stability, to ensure the quality of drugs within the validity period.

The quality of some packaging materials can not be judged correctly according to sampling conditions during acceptance. For example, aluminum foils, composite films, labels, etc., which are packaged in a coiling manner, can only be inspected at the beginning of the sample volume during acceptance and cannot be sampled. , so the test has a lot of limitations.

Different packaging methods have different quality requirements for pharmaceutical packaging materials. Materials used for fully automatic packaging are much more demanding than hand-packed materials, especially the adaptability of materials, such as the die-cutting quality and labelling rate of labels, specification size deviations, sockets and locks of paper boxes, etc. All have higher requirements. These on-machine adaptive control indicators cannot be fully verified by incoming materials inspection.

2. Quality requirements for printing companies

On this issue, Mr. Qin Rongxing, the head of AstraZeneca's Quality Assurance Department, believes that suppliers should carefully manage items related to printing, and that the electronic documents and films passed to the printers and the printer's own print versions must be managed safely.

Different drugs, such as two different doses of drugs, drugs with irrelevant or completely opposite drug mechanisms, if the packaging is confused in the printing process, the consequences are unthinkable, and therefore there must be a sound system of management. The printed version that has been destroyed must have an accurate record, and the old version must not be mixed into the updated version.

Printing equipment to ensure health, in particular, there must be strict restrictions on the amount of dust. If there is a black spot on the plate, the original drug packaging requirement may be 50 mg, and there is a black spot between 5 and 0, which becomes 5.0 mg. In addition, information errors or unclear printing are also to be avoided. In addition to meeting the quality requirements of conventional prints, the acceptance of the printing and packaging quality of pharmaceutical packaging is also relatively strict with regard to color shift and overprint accuracy control.

In addition, the dimensional deviation requirement of the specification is less than ±0.5 mm. The accuracy of aluminum foil and composite film marking with photoelectric tracking mark is 1%. , There are restrictions on the size of the paper box and the stability of the quality of the paste box, and the accuracy of the number of labels and labels on the machine.

3. Five elements of integrated quality management In principle, the same batch of products is best done by the same group of people. Because the operator has been replaced, it is uncertain whether the process will follow the original process.

(2) Equipment from printing to die-cutting processing, to ensure that the equipment fixed cold drink business - and Lu Xue does not change. After the production runs normally, the same batch of products is preferably completed on the same production line. Part of the printing is not allowed to be printed on this piece of equipment, and part of it is changed to another piece of equipment. The relative stability of the equipment or the production line is required to be guaranteed. At the same time, the printing plant will also reserve a reserve production line. When there are problems with the main production line and the production line cannot be resumed in time, the reserve production line will begin to operate. However, this situation is rare and it is not expected to happen. Because the replacement is easy to make print quality differences, causing consumer doubts.

(3) Materials AstraZeneca will order packaging materials (brands and specifications) for packaging materials. For example, printing plates and inks will not be replaced frequently.

(4) The method mainly includes production process methods and product quality inspection methods. The process must be verified by both parties and it must be fixed once it is determined. If there are changes affecting product quality, users must be notified. If it does not affect the quality of the product and it only changes slightly, it can be implemented after the printing company has evaluated and verified it.

(5) Production environment The pharmaceutical packaging materials have special requirements on the environment, especially in the dry or wet conditions, which will cause the product quality to decline. Therefore, it is necessary to analyze the specific circumstances.

4. Select suppliers

AstraZeneca usually chooses two companies, one as the first supplier and one as a backup. The principle is to choose the right one. The best company is not necessarily the best one because some medicines may be in small quantities. Based on price factors, choosing the best supplier is not suitable.

5. AstraZeneca's recommendations for quality work

Domestic printing companies pay more attention to the problems of color difference and color shift. However, the influence of the stability of the post-press processing on the quality of finished products should also be a positive concern for printing companies, but at present, it is a place easily overlooked by general printing companies. AstraZeneca advises printing companies to further enhance quality management in print version management and carton processing accuracy.

Helu Snow is a well-known cold drink company in the world. Its cold beverage products are mainly packaged in flexible packaging, paper cups and color boxes.

1. Requirements for printing companies

In the selection of printing companies, He Xuexue will first propose the indicators required by the materials, and form a long-term cooperative relationship with the target enterprises. For ancillary products (tags, tapes), more consideration will be given to the market price of the material at the time, seeking a profit balance.

In the initial development of quality standards, if the printing company should not be able to raise certain indicators, it should not be concealed. Otherwise, when quality problems occur in actual production, both parties will cause losses. Problems are solved early, as the end user will adjust the product quality index requirements according to specific conditions.

When product promotion or cold drinks modify the formula and the package needs to be revised, He Xuexue will require the printing company to properly keep the film and manuscript, and check and confirm it before mass production.

Ms. Zhong Xuemei, a packaging engineer at Hexue (China) Co., Ltd., said in an interview that since He Xuexu provided design solutions to printing companies, companies had provided end users with better suggestions based on experience, such as ensuring quality. Under the premise of the recommendation, the user is recommended to try another kind of relatively low-cost packaging materials, so that both parties achieve a win-win situation in terms of cost, and sometimes the end-users will be introduced to more suitable printing technologies to improve the quality of products.

2. Quality requirements for printed products

When printing, for example, a color, and road snow will have upper and lower limits of the scope requirements. Hygienic requirements for printed products are more stringent. Because the product needs to run at a high speed on the packaging production line, it is required that the walking performance of the flexible packaging product is better, and the surface tension, stretchability, and friction coefficient of the material must meet the requirements.

3. He Luxue's suggestions on quality work

As the top cold-drinking company, Lu Xue’s request is that when there are quality problems in the printed products, the printing companies should be able to pay enough attention to solve the problems quickly and effectively. Especially the same mistakes do not appear twice. For example, in terms of ink, due to the relatively high environmental requirements of cold drinks, there have been repeated problems in the adhesion of ink.
$Page break $
Cosmetics Company Kanebo

1. Quality requirements for packaging materials

As a cosmetic packaging material, it is first required to prevent moisture and mildew, and it is better to use environmentally-friendly materials. No harmful ingredients are allowed in printing consumables.

2. Quality requirements for printing companies When considering printing companies, Kanebo will focus on the scale of the company, such as whether it has a mature management system and equipment configuration.

Cosmetics is a new and emerging industry. After successful new product development, the printing of new packaging needs to be changed. Kanebo will require the printing company to do a good job of version management, and the eliminated and updated versions must have strict measures for proper implementation. Storage and handling. There have been cases where new and old versions appeared in new product packaging boxes at the same time. This would cause serious accidents and waste.

When it comes to label management, Kanebo and the printing companies have agreed that in the printing quality, the required text must be accurate, clear and clean, the thickness of the text, the font must be carried out several times a rigorous review. In the chromatic aberration of printed matter, a relevant standard will be established for the printing company to make reference.

3. Kanebo's recommendations for quality work

Kanebo hopes to cooperate with honest and sincere suppliers. Miss Qian Qi, deputy manager of quality department of Shanghai Kanebo Cosmetics Co., Ltd. told us about such a thing. Kanebo's packaging products are mainly divided into two kinds, one of which is the packaging that directly contacts the product, such as glass bottles. Kanebo once had a bottle of capping material for cosmetics series which was electroplated aluminum. The initial production was not very good at sealing, but the supplier worked hard and actively sought solutions. After mutual efforts, Kanebo finally succeeded. Also became a long-term partner with this supplier. When end-users encounter problems, even if they are not serious, the printing companies can actively assist end-users in making corrections and improvements, so that both parties can compete with the current fierce market competition with their strategic partners.

Photographic equipment manufacturer Kodak (Xiamen) Co., Ltd.
1. Requirements for packaging materials

Kodak (Xiamen) Co., Ltd. products are mainly disposable camera products sold abroad, there are two common packaging methods: one is a carton, one is aluminum foil composite material packaging (the inner layer is aluminum foil, the outer layer is PVC material). The packaging material must not have photosensitivity. Since Kodak does not have incoming inspections, it will require suppliers to specifically control the process to prevent waste of the remaining materials.

2. Quality requirements for printing companies

Kodak emphasized that the quality of the product was obtained through process control rather than testing after completion of production. At that time, it was found that the problem could not be remedied.

As a top producer of photographic equipment, Kodak will focus on inspections of suppliers' quality systems, process control, continuous improvement capabilities, and delivery dates. Kodak's suppliers are all well-known companies. In terms of quality requirements, we must first pass the ISO quality system certification, and many suppliers have passed the more stringent French quality system certification.

The excellent printing company quality management department will understand the requirements of the end user in detail. Kodak's quality requirements, including general requirements, such as the control of color deviations, Kodak's control of Kodak's yellowish difference is very strict and requires the use of spectrophotometers to measure L*, a*, b* values ​​in production, actual values ​​and standards. The value of the deviation must be controlled at E ≤ 4, other indicators also include friction resistance, paper folding resistance and so on.

The quality department of packaging and printing companies must also understand the co-ordination between packaging products and equipment. Because Kodak's products are automated and mass-produced, if the opening and closing force is not good enough, the equipment can be stopped and the loss cannot be counted. Kodak (Xiamen) Co., Ltd. has strict requirements on the opening and closing force of color boxes.